Forging furnace Home > Forging furnace
Iron bar forging furnace
  • Iron bar forging furnace
  • Iron bar forging furnace

Iron bar forging furnace

Item No.: FC-IBF
Power: 25kW-250kW
Voltage: 380V 50 / 60Hz
Bar diameter: 12-150mm
Temperature: 1100 ℃ for heating of steel and stainless steel, 700 ℃ for heating of brass.
Application: Heating, heat penetration, partial heating, end heating of the steel rod, etc.
INQUIRY
Electromagnetic Induction Heating
The medium frequency induction forging furnace uses the principle of medium frequency electromagnetic induction heating. After the induction coil is energized, a magnetic field is generated. The magnetic field lines cut metal bars such as steel bars, copper bars, iron bars, and aluminum bars, thereby generating an induced current inside the bar, that is, eddy current. This induced current enables the metal bar to be heated quickly, and it can reach the required temperature in a very short time. The heating time is short, and the metal material is uniformly heated. The surface of the heated bar is less oxidized and the workpiece is less deformed.
 

Energy Saving
Compared with traditional heating methods such as fuel oil and coal, induction heating has the advantages of faster heating speed, higher production efficiency, lower energy consumption, and more environmental protection. The medium frequency induction forging furnace adopts IGBT transistor device with small energy loss and inverter control technology, and the overall efficiency can reach more than 95%. Its energy saving effect is remarkable, the heat penetration is more uniform, and the heating quality is better.
 

Automatic Loading and Unloading
It can be equipped with automatic loading and unloading system, which significantly improves production efficiency and reduces labor costs.
 

Good Working Environment
During operation, its heat radiation is small and dust pollution is small, so it meets environmental protection requirements.
 

PLC inItelligent Control System
It can be equipped with a PLC intelligent control system to adjust parameters such as operating power and frequency, so the temperature control accuracy is high, the oxidation loss is small, the automation is high, and the product quality can be guaranteed.

Advantages of medium frequency induction heating and forging furnace:
  • The medium frequency induction heating and forging furnace can reach the required temperature in a very short time, which greatly reduces the oxidation of the metal.
  • The medium frequency induction heating and forging furnace has the advantages of high heating efficiency, low energy consumption, small heat radiation during production, no pollution, power saving and environmental protection.
  • The medium frequency induction heating and forging furnace can be equipped with a PLC automatic control system to realize automatic feeding and automatic completion of the heating process, which reduces labor costs and improves production efficiency.
  • The medium frequency induction heating and forging furnace, with 100% load design, can work continuously for 24 hours.
  • The medium frequency induction heating and forging furnace can be equipped with an infrared thermometer to achieve automatic temperature control, improve heating quality, and simplify manual operations.
  • Medium-frequency induction heating and forging furnaces are small in size, light in weight, and movable, occupying only 0.6 square meters, which is convenient for use with any equipment.
  • Installation, commissioning and operation of medium frequency induction heating and forging furnaces is very simple.