The installation of the high-frequency induction heating power supply is very easy. You only need to connect the required water cooling system or chiller, and then connect the single-phase 220 V [...]
Power requirements of heating gun When the HF induction heating device’s power is greater than 35 KW, a movable induction heating gun may be added. Power attenuation occurs when an [...]
The benefits of the high frequency induction heating machine: Electromagnetic induction heating, non-contact heating. Even heating and good consistency of results. Energy saving, cleanness and no pollution. Adjustable power. Flexible [...]
The high-frequency induction heater operates on the electromagnetic induction principle, with alternating current passing through the induction coil. This causes it to generate an alternating magnetic field that cuts the [...]
Induction forging furnaces can use a number of different cooling methods. Users need to determine the type of cooling system according to the power of the induction heating machine and [...]
Induction forging machines usually use an induction heating power supply with a medium frequency frequency. The power and frequency of the power supply are selected according to the size of [...]
Induction forging uses induction heating, which is a controlled and energy-efficient form of heating. Benefits of induction forging: Less oxidation Consistent temperature Repeatability Increase productivity Controlled and precise process Clean [...]
The process of buying induction hardening machine: contact FOCO engineer → communicate hardening process → communicate heating solution → FOCO proposes induction hardening solution → customer confirms the solution → [...]
The most common induction hardened materials are carbon steel, alloy steel and cast iron. Common steel types for hardening include 1045, 1141, 1144, 4140, 4340, 4150, 4350, 5150, 8650, etc.
Yes. Tempering occurs after induction hardening. Induction can complete the tempering process in seconds, and it involves heating the steel part to a lower temperature than required for the hardening [...]